Temcoat™ & Temcoat™ 3000

Temcoat provides a highly robust protective coating that is made even more effective with the addition of Wax-Tape.

Description

Temcoat™/Temcoat™ 3000 is a high-temperature microcrystalline wax-based coating compound that will not melt and can be applied at ambient temperatures up to 200°F They do not require a primer or curing time and are easily applied by hand. Temcoat 3000 is designed to maintain spreadability at lower temperatures.

End Use

Temcoat and Temcoat 3000 are used as an anticorrosion compound for aboveground and belowground surfaces. They can be used as a cold-applied coating with a wrapper or as a priming paste with Wax-Tapes®. Because of their paste-like consistency over a wide temperature range, they are an excellent material for filling voids. They can be used for straight pipe, irregular fittings and flat surfaces.

Application Procedures

Wire brush and wipe the surface clean of any loose coating, rust, scale and foreign matter. Then apply Temcoat by hand directly to the surface. At higher temperatures Temcoat can be applied by brush. On wet surfaces rub and press firmly to displace moisture and ensure adhesion. For belowground applications to protect Temcoat from mechanical abrasion, overwrap with Poly-Ply™, Guard-Wrap™, # 1 Wax-Tape® or #2 Wax-Tape®. For aboveground applications, overwrap with #2 Wax-Tape.

Packaging

3-gallon pails (approx. 24 lb/pail)
1-gallon can (4 gallons/case)
32 lb/case

Specifications

	Temcoat	Temcoat 3000
Color	Brown	Brown
Pour point	non-melting	non-melting
Flash point	350°F minimum	350°F minimum
Dielectric strength	100 volts per mil	100 volts per mil
Application temperature	32°-200°F	0°-200°F

Advantages

Withstands high ambient temperatures
Goes on easily by hand
No primer required
No waiting for drying or curing
Nonhazardous, no VOCs
Minimal surface preparation
Can be applied to wet pipe

[ Back ]

Transmenu powered by JoomlArt.com - Mambo Joomla Professional Templates Club